Ford Escape 2020-2026 Service Manual / Powertrain / Automatic Transmission / Automatic Transmission - Automatic Transmission – HF45

Ford Escape: Automatic Transmission / Automatic Transmission - Automatic Transmission – HF45

Specifications

Lubricants, Fluids, Sealers and Adhesives Part number Specifications Automatic Transmission Fluid / XT-12-QULV HU7J-M2C949-AA WSS-M2C949-A Capacities Liters Transmission fluid 4...

Other information:

Ford Escape 2020-2026 Service Manual: Description and Operation - Front Seats - System Operation and Component Description

System Operation System Diagram - Memory Seat Item Description 1 Memory Power Seat Motors 2 HS1-CAN 3 PCM 4 BCM 5 HS1-CAN 6 Ignition Switch 7 GWM 8 Memory SET Switch 9 Driver Seat Control Switch 10 MS-CAN 11 DSM 12 MS-CAN 13 DDM 14 Position Sensors 15 Motors Network Message..

Ford Escape 2020-2026 Service Manual: Description and Operation - Diagnostic Methods

This document provides critical diagnostic knowledge required for successful repair outcomes. It identifies technical competencies expected by users of this manual. Ford Diagnostic Assumptions Ford diagnostics assume the vehicle concern described by the test title is currently present. Exceptions to this rule are noted in each test. Do not replace modules or other components as directed ..

Master Access Code

What Is the Master Access Code

The master access code is a factory-set five-digit entry code. You can operate the keypad with the master access code at any time. The master access code is on the owner’s wallet card in the glove box and is available from an authorized dealer.

Displaying the Master Access Code

To display the factory-set code in the information display:

Ford Escape. Master Access Code

Remove the rubber mat. Insert the first programmed key in the backup slot. Press the push button ignition switch once and wait a few seconds. Press the push button ignition switch again and remove the key. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push button ignition switch.